The InfuZerTM XFTM - Xtra Strong 3D Parts for the toughest applications
Introducing the InfuZerTM XFTM
The InfuZerTM XFTM Automatic Parts Processor is a vacuum infuser with an integrated infiltrate management system, seen here without its internal oven, It is the perfect post process partner to many rapid prototyping or 3D printing technologies.
Easy to Use
Once you have produced a 3D part simply place it in the InfuZer XFTM and either choose from one of the pre-programmed settings or a custom build cycle. The system will then use a vacuum and temperature controlled environment to thoroughly dry, infuse and cure the part and ensure maximum infiltrate penetration.
A screen shows the progress and indicates any user action required as does an audible tone. Unused infiltrate is gathered, recycled and returned to the reservoir where it is stored.
Repeatable Results
As the process is programmable the excellent part quality and surface finishes can be consistently repeated time and time again without the imperfections associated with manual handling and infiltration, this reduced touch time also greatly reduces the risk of damage to the raw part by over handling.
When not in use the system reservoir controls the temperature and environment of the infiltrate and agitates it to prolong shelf life, meaning lower wastage and reduced costs.
Innovation as Standard
The InfuZerTM XFTM has many innovative features to enable the post processing of 3D printed parts with low odour, mess and quiet operating; all of which make it workplace friendly. Carbon filters ensure that no infiltrate fumes get transmitted into the environment, making it non hazardous.
The reservoirs can be filled quickly and easily without the risk of spillage and contamination of the infiltrate or the environment.
InfuZer Advantages
By using the InfuZerTM XFTM to post process your 3D printed parts you can add the following superior material properties:
- High Strength
- Consistent Quality
- Pressure Tolerance
- Advanced Coatings
- Chemical Resistance
- Temperature Resilience
- Industrial Post Process
Advanced Applications
The InfuZerTM XFTM allows you to unlock the maximum potential from your 3D Printer by fully infusing the raw parts with premium infiltrates to make them stronger and ideally suited to such demanding high performance applications such as:
- Medical
- Tooling
- Injection moulding
- Patten making
- Superior finishes processes
- Engineering and mechanical
- Rapid manufacturing
Technical Information
InfuZerTM XFTM Automated Parts Processor
|
Dimensions- External (D x W x H)
Crated for Shipping (D x W x H)
|
95 x 70 x 185 cm
106 x 81 x 217 cm
|
| Dimensions - Infusion Chamber (D x W x H) |
40 x 27 x 32 cm
|
| I/O Ports |
LAN, USB, Parallel
|
| Interface |
Front Panel & Buttons
|
| Default Programs |
6
|
| TFT Screen |
7" Touch Screen
|
| Capacity - Infusion Chamber |
30 Litres
|
| Temperature - Infusion Chamber |
Ambient - 60 Degrees C
|
| Temperature - Reclamation Chamber |
Ambient - 60 Degrees C
|
| Power Supplies |
230 VAC 50Hz 3000 Watt
110 VAC 60Hz 1500 Watt
|
| Weight |
200 Kilograms
|
| Supported Infiltrates |
xlaForm |
| Approvals |
CE; CSA
|
The InfuZerTM XFR30TM System Reservoir
| Infiltrate |
XlaForm
|
| Capacity |
30 Litres
|
| Temperature Range |
Ambient - 60 Degrees C
|
| Power Supply |
230 VAC 50Hz 3000 Watt
110 VAC 60Hz 1500 Watt
|
Actual specification may vary from time to time dependant on requirement at our discression.
Contact Z Solutions EU for more information and a demonstration. |
