 |
The InfuZer TM CI
Superior Quality Colour Parts Every Time
|
Introducing the InfuZerTM CITM
The InfuZerTM CITM Automatic Parts Processor is a vacuum infuser with an integrated infiltrate management system, it is the perfect post process partner for many rapid prototyping or 3D printing technologies.
Easy to Use
Once you have produced a 3D part simply place it in the InfuZer CITM and either choose from one of the pre-programmed settings or a custom build cycle. The system will then use a vacuum and temperature controlled environment to thoroughly dry, and infuse the part and ensure maximum infiltrate penetration.
A screen shows the progress and indicates any user action required as does an audible tone. Unused infiltrate is gathered, recycled and returned to the reservoir where it is stored.
Repeatable Results
As the process is programmable the excellent part quality and surface finishes can be consistently repeated time and time again without the imperfections associated with manual handling and infiltration, this reduced touch time also greatly reduces the risk of damage to the raw part by over handling.
When not in use the system reservoir controls the temperature and environment of the infiltrate and agitates it to prolong shelf life, meaning lower wastage and reduced costs.
Innovation as Standard
The InfuZerTM CITM has many innovative features to enable the post processing of 3D printed parts with low odour, mess and quiet operating; all of which make it office and classroom friendly. Carbon filters ensure that no infiltrate fumes get transmitted into the environment, making it non hazardous.
The reservoirs can be filled quickly and easily without the risk of spillage and contamination of the infiltrate or the environment.
InfuZerTM Advantages
By using the InfuZerTM CITM to post process your 3D printed parts you can add the following superior material properties:
- Great Colours
- Consistent Quality
- Increased Strength
- Enhanced Finishes
- Repeatable Results
- Complete Infiltrate Penetration
Advanced Applications
The InfuZerTM APP-CI allows you to take control the raw parts and infiltrate them to produce excellent models for applications:
- Finite Analysis
- Entertainment / Art
- Prototyping
- Architecture
- Geospatial
- Evaluation
- Education
In fact any application you can currently do with a 3D printer but with consistent repeatable results, less wastage, user intervention and for a much lower cost.
Technical Information
InfuZerTM CITM Automated Parts Processor
|
Dimensions- External (D x W x H)
Crated for Shipping (D x W x H)
|
95 x 70 x 185 cm
106 x 81 x 217 cm
|
| Dimensions - Infusion Chamber (D x W x H) |
40 x 27 x 32 cm
|
| I/O Ports |
LAN, USB, Parallel
|
| Interface |
Front Panel, Buttons
|
| Default Programs |
6
|
| TFT Screen |
7" Touch Screen Wide Screen
|
| Capacity - Infusion Chamber |
30 Litres
|
| Temperature - Infuser Chamber |
Ambient - 90 Degrees C
|
| Temperature - Reclamation Chamber |
Ambient - 90 Degrees C
|
| Power Supplies |
230 VAC 50Hz 3000 Watt
110 VAC 60Hz 1500 Watt
|
| Weight |
200 Kilo |
| Supported Infiltrates |
Composite Infiltrate |
| Approvals |
CE; CSA
|
The InfuZerTM CIR30TM System Reservoir
| Infiltrate |
Composite Infiltrate
|
| Capacity |
30 Litres
|
| Temperature Range |
Ambient - 90 Degrees C
|
| Power Supply |
230 VAC 50Hz 3000 Watt
|
Actual specification may vary from time to time dependant on requirement at our discression.
Contact Z Solutions EU for more information and a demonstration.
|
